Critical review for the quantification of leachate production: Evaluation example for the “Oum Azza” public landfill in Rabat city,Morocco

The estimation of leachate quantities produced in landfills is necessary to dimension the treatment plants allowing to reduce the polluting load of these effluents and consequently avoid their negative impacts on the environment. Different leachate quantification methods were used in this study to assess the leachate volume produced at the Oum Azza landfill. The water balance method give comparable estimations of leachate production to the Ouled Berjal landfill ratio. The first method showed average values between 487 and 495 m³/day for 2015, 2018, and 2019, and at the same time, the second method gave values between 470 and 477 m³/day for the same years. In contrast, the World Bank ratio showed high values that vary between 2260 and 2295 m³/day for 2015, 2018, and 2019. The on-site data and the statistical analysis showed us that the World Bank ratio is not adapted for the estimation of the leachates produced in Oum Azza landfill, while the water balance and the ratio of Ouled Berjal landfill allowed to give comparable results to reality.     

Assessment of deep aquifer groundwater quality in a geographically unique climatic region of Southern Western Ghats,India using water quality indices

Water quality index (WQI) models are generally used in hydrochemical studies to simplify complex data into single values to reflect the overall quality. In this study, deep groundwater quality in the Chittur and Palakkad Taluks of the Bharathapuzha river basin of Kerala, India, was assessed by employing the WQI method developed by the Canadian Council of Ministers of the Environment (CCME). The assessment of overall water quality is indispensable due to the specific characteristics of the study area, such as geography, climate, over-drafting, and prevalent agricultural practices. Forty representative samples were collected from the study area for monsoon (MON) and pre-monsoon (PRM) seasons. The results showed a general increase of contents from MON to PRM. The major cations were spread in the order Ca²⁺>Na+>Mg²⁺>K⁺ and the anions HCO₃⁻>Cl⁻>CO₃²⁻ based on their relative abundance. Among various parameters analysed, alkalinity and bicarbonate levels during MON were comparatively high, which is indicative of carbonate weathering, and 90% of the samples failed to meet the World Health Organization (WHO, 2017)/Bureau of Indian Standards (BIS, 2012) drinking water guidelines. The CCME WQI analysis revealed that nearly 50% of the samples during each season represented good and excellent categories. The samples in the poor category comprised 10% in MON and 15% in PRM. The overall WQI exhibited 15% of poor category samples as well. The spatial depiction of CCME WQI classes helped to expose zones of degraded quality in the centre to eastward parts. The spatial and temporal variations of CCME WQI classes and different physicochemical attributes indicated the influence of common factors attributing to the deep groundwater quality. The study also revealed inland salinity at Kolluparamba and Peruvamba stations, where agricultural activities were rampant with poor surface water irrigation.     

A remote sensing tool for near real-time monitoring of harmful algal blooms and turbidity in reservoirs

Harmful algal blooms (HABs) diminish the utility of reservoirs for drinking water supply, irrigation, recreation, and ecosystem service provision. HABs decrease water quality and are a significant health concern in surface water bodies. Near real-time monitoring of HABs in reservoirs and small water bodies is essential to understand the dynamics of turbidity and HAB formation. This study uses satellite imagery to remotely sense chlorophyll-a concentrations (chl-a), phycocyanin concentrations, and turbidity in two reservoirs, the Grand Lake O′ the Cherokees and Hudson Reservoir, OK, USA, to develop a tool for near real-time monitoring of HABs. Landsat-8 and Sentinel-2 imagery from 2013 to 2017 and from 2015 to 2020 were used to train and test three different models that include multiple regression, support vector regression (SVR), and random forest regression (RFR). Performance was assessed by comparing the three models to estimate chl-a, phycocyanin, and turbidity. The results showed that RFR achieved the best performance, with R² values of 0.75, 0.82, and 0.79 for chl-a, turbidity, and phycocyanin, while multiple regression had R² values of 0.29, 0.51, and 0.46 and SVR had R² values of 0.58, 0.62, and 0.61 on the testing datasets, respectively. This paper examines the potential of the developed open-source satellite remote sensing tool for monitoring reservoirs in Oklahoma to assess spatial and temporal variations in surface water quality.     

Emerging applications of green coconut: A promising lignocellulosic biomass

Waste accumulation is a grave concern and becoming a transboundary challenge for environment. During Covid-19 pandemic, diverse type of waste were collected due to different practices employed in order to fight back the transmission rate of the virus. Covid-19 was proved to be capricious catastrophe of this 20th century and even not completely eradicated from the world. The havoc created by this imperceptible quick witted, pleomorphic deadly virus can't be ignored. Though a number of vaccines have been developed by the scientists but there is a fear of getting this virus again in our life. Medical studies prove that immunity drinks will help to reduce its reoccurrences. Coconut water is widely used among all drinks available globally. Its massive consumption created an incalculable pile of green coconut shells around the different corners of the world. This practice generating enormous problem of space acquisition for the environment. Both the environment and public health will benefit from an evaluation of quantity of coconut waste that is being thrown and its potential to generate value added products. With this context, present article has been planned to study different aspects like, coconut waste generation, its biological properties and environmental hazards associated with its accumulation. Additionally, this review illustrates, green technologies for production of different value added products from coconut waste.     

Assessing the Effectiveness of Winter Cover Crops for Controlling Agricultural Nutrient Losses

A nutrient loss reduction strategy is necessary to guide the efforts of improving water quality downstream of an agricultural watershed. In this study, the effectiveness of two winter cover crops, namely cereal rye and annual ryegrass, is explored as a loss reduction strategy in a watershed that ultimately drains into a water supply reservoir. Using a coupled optimization-watershed model, optimal placements of the cover crops were identified that would result in the tradeoffs between nitrate-N losses reduction and adoption levels. Analysis of the 10%, 25%, 50%, and 75% adoption levels extracted from the optimal tradeoffs showed that the cover crop placements would provide annual nitrate-N loss reductions of 3.0%–3.7%, 7.8%–8.8%, 15%–17.5%, and 20.9%–24.3%, respectively. In addition, for the same adoption levels (i.e., 10%–75%), sediment (1.8%–17.7%), and total phosphorus losses (0.8%–8.6%) could be achieved. Results also indicate that implementing each cover crop on all croplands of the watershed could cause annual water yield reduction of at least 4.8%, with greater than 28% in the months of October and November. This could potentially be detrimental to the storage volume of the downstream reservoir, especially in drought years, if cover crops are adopted in most of the reservoir's drainage area. Evaluating water yield impacts, particularly in periods of low flows, is thus critical if cover crops are to be considered as best management practices in water supply watersheds.     

Changes in electrical generator cooling systems: Are they cost-effective sources of water now and under climate change?

In the United States, thermal power plant electrical generators (EGs) are large water diverters and consumptive users who need water for cooling. Retrofitting existing cooling systems to dry cooling and building new facilities with dry cooling can save water and reduce EG's vulnerability to drought. However, this can be an expensive source of water. We estimate that the cost of water saved by retrofitting cooling in existing EGs ranges from $0.04/m³ to $18/m³ depending on facility characteristics. Also water savings from building new EGs with dry cooling ranges in cost per unit water from $1.29/m³ to $2.24/m³. We compare costs with that for water development projects identified in the Texas State Water Plan. We find the water cost from converting to dry cooling is lower than many of the water development possibilities. We then estimate the impact of climate change on the cost of water saved, finding climate change can increase EG water use by up to 9.3% and lower the costs of water saved. Generally, it appears that water planners might consider cooling alterations as a cost competitive water development alternative whose cost would be further decreased by climate change.     

珠江口表层水中多环芳烃的分布特征及健康风险评估

分别于2015年2、5、8、11月在珠江八大入海口采集表层水体样品,应用固相萃取富集法对该区域表层水体中16种USEPA优控多环芳烃(PAHs)的时空分布特征进行分析,并利用终生致癌风险增量模型(ILCR)对该区域的饮水健康风险进行评价。结果表明:珠江口4个季度所采集的水样中,∑15PAHs的浓度范围为18.0~50.3 ng/L,含量处于中等水平。其中7种强致癌性∑7PAHs的浓度范围为1.53~3.73 ng/L,占∑15PAHs的5.89%~11.1%,∑15PAHs和∑7PAHs在枯水期(2、11月)样品中明显高于丰水期(5、8月)。就组成特征而言,各采样点PAHs以3、4环为主。珠江口表层水中非致癌类PAHs的危害商数值为0.99×10~(-5)~2.73×10~(-5),远低于USEPA规定的阈值(1);致癌类PAHs产生的健康风险为6.50×10~(-8)~2.37×10~(-7),其中Ba P导致的饮水途径健康风险最高,所有点位致癌类PAHs的健康风险均低于USEPA推荐的对致癌物质最大可接受风险水平(10~(-6)),表明珠江口表层水中PAHs尚不具备严重的致癌风险,但是仍然存在潜在的健康风险,需要重点控制和管理。     

2013-2017年京津冀区域PM2.5浓度变化特征

利用2013-2017年京津冀区域13个城市PM_2.5监测数据，综合探讨了该区域PM_2.5浓度的时空变化特征。结果表明：京津冀区域PM_2.5污染整体较重，但治理成效显著，2013-2017年区域PM_2.5年均质量浓度分别为106、93、77、71、64 μg/m³，完成《大气污染防治行动计划》PM_2.5浓度下降25%左右的目标；13个城市PM_2.5浓度各百分位数总体呈现下降趋势，且随百分位数增大而下降速率加大，PM_2.5年均质量浓度平均每年下降10.6 μg/m³，污染严重的太行山沿线城市邢台、石家庄、邯郸3个城市平均每年分别下降20.3、16.1、13.9 μg/m³；京津冀区域PM_2.5重度污染天数比例分别为19.9%、16.6%、9.5%、9.0%、7.0%，呈下降趋势。2013-2017年京津冀区域PM_2.5平均质量浓度与非重度污染天相比升高19 μg/m³，PM_2.5重度污染天平均质量浓度较非重度污染天时高244.4%。     

Preliminary studies on potential remediation of acid mine drainage‐impacted soils by amendment with drinking‐water treatment residuals

Mining operations result in a wide range of environmental impacts: acid mine drainage (AMD) and acid sulfate soils being among the most common. Due to their acidic pH and high soluble metal concentrations, both AMD and acid sulfate soils can severely damage the local ecosystems. Proper post‐mining management practices are necessary to control AMD‐related environmental issues. Current AMD‐impacted soil treatment technologies are rather expensive and typically not environmentally sustainable. We conducted a 60‐day bench‐scale study to evaluate the potential of a cost‐effective and environment‐friendly technology in treating AMD‐impacted soils. The metal binding and acid‐neutralizing capacity of an industrial by‐product, drinking water treatment residuals (WTRs) were used for AMD remediation. Two types of locally generated WTRs, an aluminum‐based WTR (Al‐WTR) and a lime‐based WTR (Ca‐WTR) were used. Highly acidic AMD‐impacted soil containing very high concentrations of metals and metalloids, such as iron, nickel, and arsenic, was collected from the Tab‐Simco coal mine in Carbondale, Illinois. Soil amendment using a 1:1 Al‐ and Ca‐WTR mix, applied at 5 and 10 percent rates significantly lowered the soluble and exchangeable fractions of metals in the AMD‐impacted soil, thus lowering potential metal toxicity. Soil pH increased from an extremely acidic 2.69 to a near‐neutral 6.86 standard units over the 60‐day study period. Results from this preliminary study suggest the possibility of a successful scale‐up of this innovative, cost‐effective, and environmentally sustainable technology for remediating AMD‐impacted acid sulfate soils.     

Subcritical water oxidation of propham by H2O2 using response surface methodology (RSM)

This study was conducted to investigate the degradation of propham, which is a compound that pollutes water and seriously threatens human health, by subcritical water oxidation and using H₂O₂ as an oxidising agent. The maximum total organic carbon removal rate of propham was obtained as 73.65% at 40 min of treatment time and 60 mM of H₂O₂ concentration and 373 K of temperature. In addition, response surface method based on the Box-Behnken design was applied to design the degradation experiments of propham for determination of the combined effects of process variables, namely temperature, concentration of oxidising agent and treatment time. The proposed quadratic model of propham degradation, which was examined with the analysis of variance, was used for navigating the design space. The R² and adjusted R² values of the model were determined as 0.9921 and 0.9819 respectively. It was shown that propham was effectively degraded, thus could be removed from the water by using an environmentally friendly method.